g5sba20-m3, G5SBA60-M3, g5sba80-m3 www.vishay.com vishay general semiconductor revision: 05-aug-15 1 document number: 89305 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated single-p hase bridge rectifier features ? ul recognition file number e54214 ? ideal for printed circuit boards ? high surge current capability ? high case dielectric strength of 1500 v rms ? solder dip 275 c max. 10 s, per jesd 22-b106 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications general purpose use in ac/dc bridge full wave rectification for monitor, tv, printer, sw itching mode power supply, adapter, audio equipment, and home appliances applications. mechanical data case: gbu ? molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs-compliant, and commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 1a whisker test polarity: as marked on body mounting torque: 10 cm-kg (8.8 inches-lbs) max. recommended torque: 5.7 cm-kg (5 inches-lbs) notes (1) unit case mounted on aluminum plate heatsink (2) units mounted on pcb with 0.5" x 0.5" (12 mm x 12 mm) copper pads and 0. 375" (9.5 mm) lead length primary characteristics package gbu i f(av) 6.0 a v rrm 200 v, 600 v, 800 v i fsm 150 a i r 5 a v f at i f = 3.0 a 1.05 v t j max. 150 c diode variations in-line case s tyle g bu - ~ ~ + case s tyle g bu + ~ ~ - ~ ~ maximum ratings (t a = 25 c unless otherwise noted) parameter symbol g5sba20 g5sba60 g5sba80 unit maximum repetive peak reverse voltage v rrm 200 600 800 v maximum rms voltage v rwm 140 420 560 v maximum dc blocking voltage v dc 200 600 800 v maximum average forward rectified output current at t c = 100 c (1) i f(av) 6.0 a t a = 25 c (2) 2.8 peak forward surge current single sine-wave superimposed on rated load i fsm 150 a rating for fusing (t < 8.3 ms) i 2 t93a 2 s operating junction and storage temperature range t j , t stg -55 to +150 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol g5sba20 g5sba60 g5sba80 unit maximum instantaneous forward voltage per diode 3.0 a v f 1.05 v maximum dc reverse current at rated dc ? blocking volt age per diode t j = 25 c i r 5.0 a t j = 125 c 300
g5sba20-m3, G5SBA60-M3, g5sba80-m3 www.vishay.com vishay general semiconductor revision: 05-aug-15 2 document number: 89305 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) unit case mounted on aluminum plate heatsink (2) units mounted on pcb with 0.5" x 0.5" (12 mm x 12 mm) copper pads and 0. 375" (9.5 mm) lead length ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - derating curve output rectified current fig. 2 - maximum non-repetitive peak forward surge current per diode fig. 3 - typical instantaneous forward characteristics per diode fig. 4 - typical reverse leakage c haracteristics per diode thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol g5sba20 g5sba60 g5sba80 unit typical thermal resistance r ? ja (2) 22 c/w r ? jc (1) 3.4 ordering information (example) preferred p/n unit weight (g ) preferred package code ba se quantity delivery mode G5SBA60-M3/45 3.565 45 20 tube G5SBA60-M3/51 3.565 51 250 paper tray 0 50 100 150 0 2.0 4.0 6.0 8.0 a v erage for w ard o u tp u t c u rrent (a) temperat u re (c) heatsink mo u nting, t c p.c.b. mo u nting, t a 1 10 100 0 50 100 150 t j = t j max. single sine-wa v e nu mber of cycles at 60 hz peak for w ard s u rge c u rrent (a) 1.0 cycle 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 100 instantaneo u s for w ard voltage (v) instantaneo u s for w ard c u rrent (a) t j = 25 c p u lse width = 300 s 1 % d u ty cycle 0 20 40 60 80 100 0.01 0.1 1 10 100 1000 percent of rated peak re v erse voltage (%) instantaneo u s re v erse c u rrent (a) t j = 125 c t j = 25 c
g5sba20-m3, G5SBA60-M3, g5sba80-m3 www.vishay.com vishay general semiconductor revision: 05-aug-15 3 document number: 89305 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical junction capacitance per diode fig. 6 - typical transient thermal impedance package outline dimensions in inches (millimeters) 0.1 1 10 100 10 100 1000 re v erse voltage (v) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 mvp-p 0.01 0.1 1 10 100 0.1 1 10 100 t - heating time (s) transient thermal impedance (c/w) case type gbu polarity sho w n on front side of case, positi v e lead by be v eled corner 0.125 (3.2) x 45 chamfer 0.085 (2.16) 0.065 (1.65) 0.020 r (typ.) 0.880 (22.3) 0.860 (21.8) 0.160 (4.1) 0.140 (3.5) 0.075 (1.9) r . 0.080 (2.03) 0.060 (1.52) 0.050 (1.27) 0.040 (1.02) 0.080 (2.03) 0.065 (1.65) 0.210 (5.33) 0.190 (4.83) 0.140 (3.56) 0.130 (3.30) 9 typ. 5 typ. 0.085 (2.16) 0.075 (1.90) 0.026 (0.66) 0.020 (0.51) 0.310 (7.9) 0.290 (7.4) 0.740 (18.8) 0.720 (18.3) 0.710 (18.0) 0.690 (17.5) 0.100 (2.54) 0.085 (2.16)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
